ASEPCO Radial-Diaphragm™ Process Valves

Asepco Process valve full and cutview images side by side

Designed for critical aseptic processing applications

The ASEPCO 90° process valve is used in process lines at the point where the flow path changes 90°. These flow changes are commonly found in the WFI system loops and the food, dairy, and beverage industries. The cylinder of the ASEPCO valve chamber is easy to SIP/CIP and the right angle flow path naturally turns a horizontal flow path to a vertical flow path.

Features & Benefits

Asepco process valve with features labeleds

90° process valve drains completely in three mounting positions including upside down
Can be CIP/SIP to eliminate product caking
Designed to easily fit into tight piping areas

Assembles with a clamp, enabling diaphragm change-outs in under a minute
Integral travel stops that never need adjusting

Specifications

Put a behind-the-seat flowpath in your lines! See the ASEPCO Switch schematic for an example.

Process Valve drawings with measurements

	Material	316L, AL6XN, Hastelloy, Alloy C-22 and C276, Polypropylene Machined from solid, hot-rolled, bar stock
	Surface Finish	20-25 Microinch RA (180 grit) 15-19 Microinch RA (240 grit) 9-11 Microinch RA (320 grit)
	Sizes	.5 inch, .75 inch, 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch
	Outlet Connections	Sanitary flange and buttweld
	Optional Port Connections	Per customer specification
	Maximum Pressure	250 psi
	Maximum Temperature	135°C/275°F
	Marking	Each valve is marked for full material traceability
	ISO	All product and procedures are governed by our ISO Quality Assurance Program
	Packaging	All valves are separately packed in foam packing
	Non-Standard Custom Products	Please contact our Customer Service department for any non-standard valve requirement