ASEPCO Weirless Radial-Diaphragm™
Block and Bleed Valves
A dead-leg-free block and bleed valve that’s reliable and easy to use!
|Recently we faced a challenge from our customers to remove the dead leg between the seal points of a typical block and bleed. After painstaking hours of research and development, we’ve created the dead-leg-free ASEPCO Block and Bleed Valve.
Unlike typical valves, this is a block and bleed valve that is machined together to shorten the area between the two valve seats. We’ve applied our contamination-free, radial-diaphragm technology to create a reliable valve that is
|easy to assemble and inspect, with no dead leg, and in so doing, we’ve eliminated potential sources of contamination and the extra cleaning time of a typical valve.
We’ve designed hundreds of special valves by customer request. Call us to talk about your special needs.
Valve sizes: 0.5″ compact, 0.75″, 1.0″, and 1.5″
|Material||316L, AL6XN, Hastelloy
Machined from solid, hot-rolled, bar stock, or forgings
|Surface Finish||Max. 20 micro-inch Ra (0.5 um Ra), Electropolished
Max. 15 micro-inch Ra (0.375 um Ra), Electropolished
Max. 10 micro-inch Ra (0.25 um Ra), Electropolished
|Sizes||1/2 Compact, 3/4, 1, and 1,5 inch|
|Available Connections||Hygienic clamp, tube-end|
|Handle Colors||Standard: 1/2, 3/4, 1, and 1.5 inch black
On request: blue, red, yellow, amber, green, purple
|Maximum Pressure||150 psi|
|Marking||Each valve is serialized and marked for full material traceability|
|ISO||All products and procedures are governed by our ISO Quality Assurance Program|
|Standards||BPE, CE-PED, ASME|
|Actuators||Manual or pneumatic, fail open or closed|
|Diaphragms||Silicone, Silicone Plus, EPDM, EPDM Plus|
For the complete specifications, reference the ASEPCO Block and Bleed Valve Datasheet.
Killer Apps: Kill Contamination with Our Block and Bleed Valve
Killer Apps: Block and Bleed Valve
For help or to request more information, contact firstname.lastname@example.org.
We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.