ASEPCO Weirless Radial-Diaphragm™
Used in process lines at the point where the flow path changes 90°
|The ASEPCO 90° Process Valve is used in process lines at the point where the flow path changes 90°. These flow changes are commonly found in the WFI system loops and the food, dairy, and beverage industries. The cylinder of the ASEPCO valve||chamber is easy to SIP/CIP and the right angle flow path naturally turns a horizontal flow path to a vertical flow path.
Valve sizes: 0.5″, 1.0″, 1.5″, 2.0″, 3.0″, and 4.0″
Put a behind-the-seat flowpath in your lines! See the ASEPCO Switch schematic for an example.
|Material||316L, AL6XN, Hastelloy, Alloy C-22 and C276, Polypropylene
Machined from solid, hot-rolled, bar stock
|Surface Finish||Max. 20 micro-inch Ra (0.5 um Ra), electropolished
Max. 15 micro-inch Ra (0.375 um Ra), electropolished
Max. 10 micro-inch Ra (0.25 um Ra), electropolished
|Sizes||0.5 inch, 1 inch, 1.5 inch, 2 inches, 3 inches, 4 inches|
|Outlet Connections||End: Sanitary flange and buttweld; Optional Port: Per customer specification|
|Maximum Pressure||(valve body pressure only)
ASME vessels: 250 psi (17 bar)
PED vessels: 175 psi (12 bar)
|Maximum Temperature||Varies from 135°C/275°F to 260°C/500°F depending on diaphragm material|
|Marking||Each valve is serialized and marked for full material traceability|
|ISO||All products and procedures are governed by our ISO Quality Assurance Program|
|Standards||BPE, CE-PED, ASME|
|Actuators||Manual or compact pneumatic, fail open or closed|
|Diaphragms||Silicone, Silicone Plus, EPDM, EPDM Plus, Viton, PTFE|
For the complete specifications, reference the ASEPCO Process Valve Datasheet.
Webpage: ASEPCO Switch Schematic
Killer Apps: Process Valve
Article: Valve Basics
For help or to request more information, contact firstname.lastname@example.org.
We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.