ASEPCO Weirless Radial-Diaphragm™
Do you have a vessel that has a mixer or other equipment mounted in the center of the vessel head? …If so, you need a Tangential Valve.
|We developed the ASEPCO Weirless Radial-Diaphragm Tangential Valve specifically for situations where a valve needs to be mounted off-center on the vessel head. This design is completely drainable in an off-set position and it retains all||the standard benefits of an ASEPCO Weirless Radial-Diaphragm valve.
Valve sizes: 0.5″, 1.0″, 1.5″, 2.0″, 2.5″, and 3.0″
|Material||316L, AL6XN, Hastelloy
Machined from solid, hot-rolled, bar stock
|Surface Finish||Max 20 Microinch Ra (0.5 um Ra), electropolished
Max 15 Microinch Ra (0.375 um Ra), electropolished
Max 10 Microinch Ra (0.25 um Ra), electropolished
|Sizes||1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch|
|Outlet Connections||Standard: Hygienic clamp or tube end (others available)|
|Maximum Pressure||(valve body pressure only)
ASME vessels: 250 psi (17 bar)
PED vessels: 175 psi (12 bar)
|Maximum Temperature||Varies from 135°C/275°F to 260°C/500°F depending on diaphragm material|
|Marking||Each valve is marked for full material traceability|
|ISO||All products and procedures are governed by our ISO Quality Assurance Program|
|Standards||BPE, CE-PED, ASME|
|Actuators||Manual or compact pneumatic, fail open or closed|
|Diaphragms||Silicone, Silicone Plus, EPDM, EPDM Plus, Viton, PTFE|
For the complete specifications, reference the ASEPCO Tangential Valve Datasheet.
Video: Tank-Bottom Valve Animation
Killer Apps: Tangential Valve Helps Save You Money!
Article: Valve Basics
For help or to request more information, contact email@example.com.
We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.