Asepco.com

Give Us a Call

AseptiPort Manifold

ASEPCO ASEPTIPORT Probe Mount Family

Lots of probes, but not enough space on your vessel?

OverviewFeatures & BenefitsProbe Mount FamilySpecificationsDatasheet & Resources
ASEPCO AseptiPort Manifolds for probes and sensor attachment to vessels
The ASEPTIPORT Probe Mount Family provides cleanability and flexibility for probe attachments. We know that cleanability is one of the biggest challenges that you face on a daily basis.

Whether you use the Single Port version or our ASEPTIPORT Manifold, the sealing point for your probes is on the face of the probe mount, which makes cleaning significantly easier and more consistent than other probe mounting options.

By offering multi-probe assemblies, we give you the flexibility you need with reduced installation and maintenance costs as well as a smaller footprint in your vessel.

Flexibility is ensured by attaching the probe mounts via ASEPCO’s ASEPCONNECT™ or QUICKONNECT™ Vessel Connectors. These connectors, whether used for connecting flush-mounted probes, instruments, or valves to tanks, are easier to install and cleaner than alternative tank-attachment mechanisms.

ASEPCO AseptiPort for attaching probes and sensors to vessels, features indicated
  • Clean, aseptic design
  • Save space by attaching multiple 12-mm probes through one connector on your tank
  • Save time and cost by eliminating the need for multiple holes into your vessels
  • So flexible you can use 12-mm probes of varying lengths
  • An incredibly easy sleeve mounting system that secures each probe
  • Screw in probes or attach with clamps
  • Can install blanks into any port to block the port
  • Can be customized to suit your needs
ASEPTIPORT Manifold
  • Probes thread into probe sleeve
  • Manifold attaches to tank via a 4-inch ASEPCONNECT or QUICKONNECT Vessel Connector
  • Standard configuration is a circular design that comes with three probe mounts and a built-in valve with two ports for SIP/CIP
  • Uses our standard 0.5-inch radial-diaphragm valve
  • Choose between a manual or pneumatic actuator
  • Probes can be arranged in a circular or linear design
  • Manifold can be configured with up to eight probes
AseptiPort Manifold Options Callouts

ASEPTIPORT Tri-Probe Threaded Probe Mount
  • Three probes attach to your tank in a very small footprint
  • Probes easily screw into sleeves
  • Probe mount attaches to the tank with a 2.5-inch ASEPCONNECT or QUICKONNECT Vessel Connector
Aseptiport 2.5-inch Triple Probe Mount

ASEPTIPORT Tri-Probe Clamp-style Probe Mount
  • Three probes attached to your tank in a small space
  • Probes easily removed with clamps
  • Probe mount attaches to the tank with a 4.0-inch ASEPCONNECT or QUICKONNECT Vessel Connector
ASEPTIPORT Tri-Probe Clamp-style Probe Mount

ASEPTIPORT Single-Probe Mount
  • Designed as a direct replacement for the traditional Ingold port
  • By moving the sealing point of probe from inside the probe mount to the face of the probe mount, clean ability becomes significantly easier and more consistent
  • A single-probe unit fits in the same space as more traditional mounts and allows you to easily attach your probe with a simple clamp
  • Mount welds into the tank
ASEPTIPORT Single-Probe Mount
AseptiPortManifold_spread-v2
Specs
Material 316L, AL6XN, Hastelloy C-22, C-276
Surface finishes Max 20 micro-inch Ra (0.5 ?m Ra), Electropolished
Max 15 micro-inch Ra (0.375 ?m Ra), Electropolished
Max 10 micro-inch Ra (0.25 ?m Ra), Electropolished
Connection Single probe version welds into tank.
Multiprobe versions clamp to ASEPCONNECT or QUICKONNECT Vessel Connectors.
Design pressure -14.5 to 101.5 psig
(Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design temperature -80 to 200°C
(Maximum working temperature is determined by the design temperature of the gasket being used in the assembly.)
Marking All ASEPTIPORT probe mounts are marked for full material traceability according to ASEPCO’s ISI QA Program
ISO All products and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

For the complete specifications, reference the ASEPTIPORT Datasheet.

For a printable version of this web page that includes the product information, features & benefits, specifications, and drawings, download the PDF.

pdf-download-icon ASEPTIPORT Datasheet

We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.