QUICKONNECT™ Inline Connectors
Sampling from your pipes and no tools required!
|At ASEPCO, we’re always trying to make things easier for you, and our QUICKONNECT Inline Connector is another example. You probably have aseptic connectors associated with the piping in your facility, but they do have the challenges of cross-threading nuts and they require using tools. It’s impossible for one person to hold the part||being installed while securing the connector—two people are required to install them! Not so with our QUICKONNECT Inline Connector. The QUICKONNECT Inline Connector assembles with a clamp that snaps around the instrument you’re installing. There are no bolts to cross-thread and no tools are needed.|
|Material||316L, AL6XN, or Hastelloy|
|Surface finish||Max. 20 micro-inch Ra (0.5 ?m Ra), Electropolished
Max. 15 micro-inch Ra (0.375 ?m Ra), Electropolished
Max. 10 micro-inch Ra (0.25 ?m Ra), Electropolished
|Sizes||1.5 inch and 2 inches standard; other sizes are available upon request|
|Connection||Tri-clamp component connection|
|Design pressure||-14.5 to 101.5 psig
(Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
|Design temperature||-80 to 200°C
(Maximum working temperature is determined by the design temperature of the gasket being used in the assembly.)
|Marking||Each connector is marked for full material traceability|
|ISO||All products and procedures are governed by our ISO Quality Assurance Program|
|Standards||BPE, CE-PED, ASME|
For the complete specifications, reference the QUICKONNECT™ Inline Close Couple Aseptic Connector Datasheet.
Killer Apps: QUICKONNECT Inline Sampling Assembly
Killer Apps: Introducing the QUICKONNECT Vessel Connector
For help or to request more information, contact firstname.lastname@example.org
We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.