Give Us a Call


QUICKONNECT™ Close-Couple Aseptic Connectors

An old idea with a new twist… no tools required!

QUICKONNECT ConnectorFeatures & BenefitsSpecificationsDatasheet & Resources
QUICKONNECT full and cutview images side by side

At ASEPCO, we’re always trying to make things easier for you, and we’ve done it again with our QUICKONNECT aseptic connector. You probably have vessel connectors in your facility, and they work well, but they do have the challenges of cross-threading nuts, they require using tools, the split clamps are independent of each other. It’s impossible to hold around the part you are installing, and you need two people to install them! Not so with our QUICKONNECT, we’ve made this already simple device even easier to use.

Think about how much easier the QUICKONNECT is to

use compared to the standard model: it assembles with a clamp—no more cross-threading—ever, no tools are needed, split clamps that snap around the part your installing, and QUICKONNECT can be assembled by one person. It will make things a little easier for you and, most likely, a little less costly.

The next time you build a vessel consider using a QUICKONNECT—it’s sure to make your process run smoother and preventative maintenance will be a snap. Want to see what one is like? No problem, just contact Barry and he’ll set you up with a 30-day demo.

QUICKONNECT Aseptic Connector cutview with callouts
  • For super-fast change out of instruments–no tools required
  • Tri-clamp connection provides quick product changeover
  • Galling is not a concern with this connector because there are no threaded parts
  • Can be assembled by one person
  • Our patented sealing face improves gasket sealing edge
  • Flush-mounted to tank, eliminating dead legs and leakage
  • Clean, aseptic design
  • Large outside diameter to avoid warping (other diameters available)
QUICKONNECT dimensions image and measurements table
QUICKONNECT shown disassembled
Quickonnect apart
Material 316L, AL6XN, or Hastelloy
Surface finish Max. 20 micro-inch Ra (0.5 ?m Ra), Electropolished
Max. 15 micro-inch Ra (0.375 ?m Ra), Electropolished
Max. 10 micro-inch Ra (0.25 ?m Ra), Electropolished
Sizes 3/8 inch through 4 inches
Thickness 1 inch standard height, custom heights available upon request
Connection Tri-clamp component connection
Design pressure
-14.5 to 101.5 psig
(Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design temperature -80 to 200°C
(Maximum working temperature is determined by the design temperature of the gasket being used in the assembly.)
Marking Each connector is marked for full material traceability
ISO All products and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

For the complete specifications, reference the QUICKONNECT™ Close Couple Aseptic Connector Datasheet.

For a printable version of this web page that includes the product information, features & benefits, specifications, and drawings, download the PDF.

pdf-download-icon QUICKONNECT™ Close Couple Aseptic Connector Datasheet

We specialize in customization. Please contact our Customer Service Department for any non-standard product requirement (800) 882-3886.